|
|
|
|
|
|
Pressure Gauge 15
|
|
|
Two inch 15 PSI pressure gauge, installed on bung.
New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
Stainless Steel Siphon Tube
|
|
|
33" length .625" OD thin wall tubing with 3/8 NPT at one end and cut 45 degrees at bottom for unobstructed fluid dispensing.
New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
Special Low Output Pressure Nitrogen Regulator
|
|
|
Custom built low maximum output pressure solid brass nitrogen regulator with 2 inch diameter gauges, precise easy to control 0-15psi working pressure spring and gauge. New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
DrumPreserve Aluminum Bung Assembly
|
|
|
Complete billet machined aluminum bung assembly with extremely high flowing pressure relief valve, brass N2 inlet valve, high strength stainless steel dispensing fittings and full port lockable dispensing valve.
New York State Residents please call 585-993-6305 for sales and service.
INCLUDES
3 ft of 1/2in superthane dispensing hose
4 ft of 1/4in superthane nitrogen hose
3/8 NPT adapter to .625" OD tube for siphon
|
|
|
|
|
|
|
|
|
|
Jiffy-Tite Valved Quick Couplers
|
|
|
Optional Jiffy-Tite anodized aluminum valved quick couplers, for
nitrogen and dispensed fluid. Redundant shutoff valves on both plugs and
couplers, great for transportation. Specify gasoline, methanol or nitromethane. New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
Drum Preserve System
|
|
|
Kit Contents:
Complete billet machined aluminum bung assembly with extremely high flowing pressure relief valve, brass N2 inlet valve, high strength stainless steel dispensing fittings and full port lockable dispensing valve. Custom built low maximum output pressure solid brass nitrogen regulator with 2 inch diameter gauges, precise easy to control 0-15psi working pressure spring and gauge.
3ft- 1/2in ID Dispensing Hose
4ft- 1/4in ID Nitrogen Hose
1- copper adapter 3/8NPT to .625" OD tubing for siphon
Required to complete system:
Nitrogen Cylinder (available from welding supply)
** Less than 10 cubic feet of nitrogen to preserve and dispense 30 gallons of liquid at 3-5 psi
1/2in Copper Pipe Siphon Tube (32in for 55gal drum/26in for 30gal drum)
Failure to properly store racing gasoline can result in the loss of the gasoline’s “front ends”. This can result in a subsequent lean condition in the engine’s combustion chambers leading to reduced HP, and possibly detonation and preignition in otherwise properly tuned engines! Racing gasoline should be stored in sealed and pressurized containers to preserve the critical front ends of the fuel!
New York State Residents please call 585-993-6305for sales and service.
|
|
|
|
|
|
|
|
|
|
DrumPreserve Stainless Steel Bung Assembly
|
|
|
Complete stainless steel bung assembly with stainless steel fittings. Brass 10 PSI safety relief valve. Stainless steel bung and fluid dispensing fittings, brass nitrogen fittings.
INCLUDES
3 ft of 1/2 in superthane dispensing hose
4 ft of 1/4in superthane nitrogen hose
Irradiated polyethylene tapered gasket
1- stainless adapter 3/8NPT to .625" OD tubing for siphon
New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
Special "Two-Stage" low output pressure nitrogen regulator
|
|
|
Two stage design delivers constant outlet pressure regardless of cylinder pressure. Precise control of pressure with 0-30 psi gauge and outlet ball valve.
|
|
|
|
|
|
|
|
|
|
Drum Preserve Stainless System
|
|
|
Kit Contents:
1- Billet stainless DrumPreserve bung assembly
1- 3' length of 1/2" ID SuperThane fluid dispensing hose
1- 4' length of 1/4" ID SuperThane nitrogen hose
1- Low output nitrogen regulator
1- stainless adapter
3/8NPT to .625" OD tubing for siphon
Required to complete system:
Nitrogen Cylinder
1-32" length of .625" OD Stainless tubing to be epoxied to the supplied adapter for siphon
Nitrogen blanketing is an excellent means of preserving and dispensing foods like syrups and vegetable oils.
New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
|
|
|
|
|
|
Drum Preserve Dual System
|
|
|
Kit Contents:
Special Low Output Nitrogen Regulator
2- Billet Aluminum Drum Preserve Bung assembled with the required brass fittings (stainless steel optional)
2- 3ft- 1/2in ID Fuel Hose
2- 4ft- 1/4in ID Nitrogen Hose
Special Low Output Pressure Nitrogen Regulator
2- Adapters 3/8 NPT to .625" OD tubing for siphon tubes
Required to complete system:
Nitrogen Cylinder (available from welding supply)
** Less than 10 cubic feet of nitrogen to preserve and dispense 30 gallons of liquid at 3-5 psi
Copper or Stainless Steel 1/2 inch Tubing (26in for 30gal drums, 32in for 55gal drums)
Failure to properly store racing gasoline can result in the loss of the gasoline’s “front ends”. This can result in a subsequent lean condition in the engine’s combustion chambers leading to reduced HP, and possibly detonation and preignition in otherwise properly tuned engines! Racing gasoline should be stored in sealed and pressurized containers to preserve the critical front ends of the fuel!
New York State Residents please call 585-993-6305 for sales and service.
|
|
|
|
